The IP67 USB3.0 series is the new member to CONEC IP67 series connector family.
USB 3.0 provides data transfer rates 10 times faster than USB 2.0. Integrated into the CONEC bayonet locking housing the USB 3.0 connectors become suitable for industrial applications. The bayonet locking design allows a fast, simple and robust IP67 protected connection and ensures protection against environmental influences in rough conditions.
The new USB 3.0 Type A is plug compatible to USB 2.0 Type A. I.e. the Type A USB 3.0 connectors and sockets do fully accept all Type A connectors from the former generations. USB 3.0 Type B and Type Micro-B sockets are suitable to accept USB 2.0 Type B and Type Micro-B connectors, but vice versa those connections cannot be mated together.
The difference between USB 2.0 and USB 3.0 is that an additional signal pair allows full duplex data transfer, i.e. USB 3.0 can read and write data simultaneously at full speed. This is the first time a bidirectional data transfer is incorporated into the Universal Serial Bus.
A further improvement of USB 3.0 is the increased maximum unit load. USB 3.0 supports up to six devices with up to 150 mA load per device, i.e. a total load of 900 mA.
The IP67 USB3.0 connector series is available in plastic and metallised plastic. The Type A / Type A panel mounted receptacles are suitable for front and rear panel mounting. The cable connector accepts cable diameter between 4.0 mm and 6.0 mm. Besides the single connector the following cable assemblies are available in different lengths:
To protect the connector against dirt and moisture in unmated condition, protection caps with tether are available.
Productdetails:
Additional benefits/Technical Data
Data transmission | up to 4,8 Gigabit |
---|---|
Locking type | Bayonet |
Type of termination | Solder |
Terminal cross section | AWG27 to AWG22 |
Cable diameter | 4 mm to 6 mm |
Contact platin | Gold or Nickel |
Connector operating temperature | -40°C – +85°C |
Degree of protection in mated condition | IP67 |